MOCON’s RACK-6™ System increases throughput for testing the Oxygen transmission rate through RIGID packages when used in conjunction with OX-TRAN® 2/61. Designed to allow for rapid testing of rigid packages containing Oxygen barrier and scavenger material. Features PACKAGE conditioning Rack Container Transfer Unit (CTU) Quickly adaptable and retrofittable to the MOCON OX-TRAN® Model 2/61 Continually condition six (6)
The Package Temperature Chamber (PTC) is used to provide an accurate, stable temperature when testing PACKAGES. It provides adequate room for testing multiple samples, allowing increased output, and ensuring that all samples are tested under the exact same conditions. Features Temperature uniformity Microprocessor control shows actual temperature within 0.1°C Push-button controls for temperature set point
The Package Environmental Chamber (PEC) is used in PACKAGE testing to create an environment which aids in controlling humidity levels by precisely holding the temperature throughout the Chamber. This helps eliminate scattered transmission rate data caused by fluctuations in room temperature. Features The test temperature ranges and controlled relative humidity are restricted only by the
This fast and flexible capsule-weighing sorting system is available for on and off line use. Featuring a single-weight sensor that re-zeros itself between every weight measurement, even at 2,000 capsules per minute. The VERICAP® Model 4000 runs at line speed with nearly any filler. Features Requires calibration of only one sensor Calibrates itself automatically during operation
MOCON’s Consulting & Testing Services offers standard permeation testing. These services are primarily accomplished on MOCON manufactured equipment for the testing of water vapor, oxygen and carbon dioxide transmission rates. They are performed in accordance with established industry accepted methods for both sample preparation and analysis. Our labs are located all over the world with
MOCON’s Consulting & Testing Services Group offers a wide range of “semi-standard” testing services. These are tests that MOCON is uniquely equipped to perform on a routine basis due to high industry demand. Testing for… Film testing for N2TR Porous film WVTR (101K) Film testing for Wet CO₂ Film testing of Aroma Component-TR (use AromaTran
MOCON’s Consulting and Testing Services Group address the Entire Food/Package Life Cycle. MOCON has established a first-of-its-kind, one-stop approach for the analysis of food, beverages, pharmaceuticals, etc. and related packaging from raw material to transport to shelf life. MOCON’s reputation as setting the gold standard for packaging testing will now be expanded beyond our existing
Our testing laboratory has specialty testing for seal strength and leak detection. These tests are primarily performed on MOCON’s line of package integrity test instruments. Testing for… Seal Strength: Burst open/closed with restraining plates ASTM F2054 Burst open/closed without restaining plates ASTM F2095 Leak Detection: Pressure Decay ASTM F2096 Vacuum Decay Bubble Method ASTM D3078,
MOCON maintains a cGMP test lab for water vapor and oxygen permeation testing for clients that require services performed under a strict quality management program, such as the Pharmaceutical, Medical Device and Healthcare related industries. The main differences between cGMP and Standard Testing are: Organization and Personnel Quality Assurance Document Control Records Management Facility Conditions
A stand along fully automated water vapor transmission rate (WVTR) system. Test in the same range as the PERMATRAN-W model 3/33 G. Ideal for those who need fast and accurate results. Easy to use for those new to permeation while offering the features needed for advanced users. Automatic maintenance of RH, temperature, pressure and flow.